Heat stabilised, injection moulding grade nylon 66, reinforced with 30% glass fibres.
ID: Material Name: Material Grade: Charateristics: Application: Brand & Suppliers: Density(g/cm3) Spec: 1: ABS: ABS 15E1: TAIRILAC: 1.05: 2: ABS: ABS BASF Terluran GP-22: Terluran GP-22 is and easy-folw, general purpose injection molding grade with high resistance to impact and heat distortion
Bay Plastics offer a range of nylon and nylatron plastic materials including sheets, plates, tubes and rods. Find out more and buy online today.
As defined by the Federal Trade Commission (FTC), nylon “is a long – chain synthetic polyamide in which less than 85 per cent of the amide linkages are attached to …
The name “nylons” refers to the group of plastics known as polyamides. Nylons are typified by amide groups (CONH) and encompass a range of material types (e.g. Nylon 6,6; Nylon 6,12; Nylon 4,6; Nylon 6; Nylon 12 etc.), providing an extremely broad range of available properties.
The majority of nylons are semi-crystalline and generally very tough materials with good thermal and chemical resistance. The different types (nylon 6, Nylon 6,6 and Nylon 12…) give a wide range of properties with specific gravity, melting point and moisture content tending to reduce as the nylon number increases.
3 Introduction ZYTEL® is DuPont’s registered trademark for its com- prehensive range of nylon resins. Since the invention of nylon by DuPont in the 1930s, it has become the
Truck Mudguards – Dynaplas manufactures and sells truck mudguards and fenders produced from polyethylene, aluminium and stainless steel, plus more. Have a look.
CableTies Online are one of the Uk’s leading suppliers of cable ties and accessories, including nylon, stainless steel and releasable cable ties, in many sizes and colours.
A2 GF30 is a heat stabilised normal viscosity nylon 66 injection moulding grade reinforced with 30% glass fibres A2 GF30 has the following properties: High stiffness Good balance of strength